All drivers need to be aware of the natural laws governing any stationary or moving object.
The rules of the road must be followed. However, knowing the natural laws and how they work will enable you to anticipate how your vehicle will respond to different situations. It will also help to instill confidence behind the wheel. These are some tips and tricks that will help you to control your vehicle following natural laws.
What are Diving’s Natural Laws?
Gravity: is the force that pulls everything towards the center. Everybody and everything experience gravity. This has a significant effect on your vehicle as you drive uphill or downhill.
You can drive uphill but gravity is pushing your vehicle in the other direction. To get to the top of the hill you’ll need to increase engine power and maintain your speed limit.
Driving downhill will cause gravity to push your vehicle forward, causing it to accelerate. You should apply your brakes slowly and gradually to reduce your vehicle’s speed and maintain control.
Inertia According to the law of inertia,
The object at rest tends not to move
Motion objects tend to move at the same speed and in the same direction.
If an unbalanced force influences objects, they can change their motion.
The law of inertia applies both to your vehicle and any objects that are within it. A car can continue to move until it is stopped or slowed down by another force, whether it’s the brakes or obstruction. For example, if you drive at 55mph, each object in your car is moving at 55mph. If the car hits a barrier, all objects still move at 55mph. This is why it is important to have seatbelts, bags, and other safety devices. You should keep any items that are not required inside your vehicle secure.
Potential energy: The energy contained in an object. The most common type is potential energy, which is when an object can “fall”, or be pulled towards the center of the Earth by gravity. As an example, if you park your vehicle at the top of a hill, gravity is pulling it downwards.
Kinetic Energy (the energy caused by motion) the energy or force generated by motion is called kinetic energy. The kinetic energies of a vehicle moving at a high speed have a kinetic value. This means that the vehicle’s kinetic energy increases with increasing speed. You will need to exert more effort to stop your vehicle if it has more kinetic power.
Friction: A force created by the contact between surfaces on another surface. Remember that friction is:
The weight of your vehicle will cause an increase in the price
If your tires are under-inflated, or too high, the value of your tires will be lower
If your tires are worn evenly, the tire’s performance will be reduced
It is affected by the material and road condition
Momentum: the force present in a moving object. The speed and weight of an object will determine the momentum. You and your vehicle gain momentum when you drive. This is dependent on your vehicle’s total weight and the speed you are traveling at. To decrease your vehicle’s momentum when you slow down or stop it, follow these steps:
You can use the friction force of your brakes to actuate your brakes.
The friction force between your tire and the road is automatically used.
Switch to a lower speed if you need to use the compression force of your engine.
Understanding the Natural Laws of Driving
These forces influence how your vehicle operates, no matter what type of vehicle it is or the skill level of the driver. Although you don’t necessarily need to be thinking about physics when driving, it is important to have a basic understanding of these laws. They will allow you to better control your vehicle at turns, stops, and other driving situations. It is possible to be more alert in emergencies and avoid accidents by being well-informed about the natural laws that can impact driving.
Once you understand the driving laws, you can put your knowledge to work. Canberra driving instructor provides you with the best knowledge and skills that require for driving.